Heat pump quote
KKCNN2P8NV
For Adam Reid
Heat pump quote
52 Ballater Drive, Bearsden, Glasgow, Lanarkshire, G61 1BX, Scotland
The location for your quote is confirmed. If you need to change it, you will need to start a new quote.
Your energy performance certificate (EPC)
We could not find an EPC for your property
Step complete
Property
Please review the details below and update if needed.
Property type
House type
Number of floors
Number of floors in your house
Total floor area (m²)
Type a value or use the buttons
Main fuel type
Heating
Hot water
Bedrooms
Bathrooms
Radiators
You can set to zero if you have underfloor heating
Loft or roof insulated
Walls insulated
Floor insulated
Windows double or triple glazed
Step complete
Grant
Potential grant funding of up to £7,500 is available, with an additional £7,500 of funding available as an optional interest free loan.
More info
Do you own the property?
Do you live in this property as your main residence?
Second homes are not eligible for the grant
Step complete
HES grant
Own the property
You have indicated that you own the property
Main residence
You have indicated that this is your main residence
Energy performance certificate (EPC)
You do not have an EPC, but we can help organise one for you as part of the installation process
Would you like to see pricing with the HES grant applied?
Step complete
Tailored hardware packages
Correct sizing of your heat pump involves a comprehensive assessment of your property including accurate calculations around energy usage and heat loss. We will do this prior to installation.
For the moment, based on high-level information, we have calculated a heat loss of 9.9kW and assumed 4 occupants.
4
Heat loss (kW)
3
Occupants
Cylinder sizing
We typically recommend 50 litres of cylinder capacity per occupant. However, you can override this here.
200 litres
0l
100l
200l
300l
400l
3 packages available
Sort by:
Heat pump
Selected
Standard: Samsung R290
1 x heat pump
1 x water cylinder
5 kW
200 litre water cylinder
estimated price
£11,694
no VAT applicable
Heat pump
Premium - Vaillant aroTHERM Plus
1 x heat pump
1 x water cylinder
4 kW
200 litre water cylinder
estimated price
£12,969
no VAT applicable
Heat pump
Advanced: Worcester Bosch Compress
1 x heat pump
1 x water cylinder
4 kW
210 litre water cylinder
estimated price
£13,933
no VAT applicable
Indicative savings
We can provide you with high-level indicative savings you can expect to make through replacing your boiler + radiators system with a heat pump. If you proceed with the installation, we will provide you with an MCS accredited design which will provide you with accurate payback information.
Are you interested in seeing these savings?
Tell us more about your current bill
Your main heating system is a boiler + radiators system supplied by gas. This is also used to heat your hot water. Tell us more about your current gas bill.
How would you like to enter your fuel costs?
Annual usage (kWh)
Price per kWh (pence)
Daily standing charge (pence)
Electricity daily standing charge (pence)
The standing charge you already pay on your existing electricity supply
Choose an electricity tariff for comparison
Adjusting your energy usage
Time-of-use electricity tariffs are designed to encourage you to use electricity when it is cheaper. If you set your heat pump to turn off between 4pm and 7pm, you can save money on your energy bill on certain tariffs. You can use this toggle to see how this might affect your savings.
Turn off heat pump between 4pm and 7pm?
Step complete
Savings summary
Your existing yearly gas costs
Heating
Hot water
Standing charges
Total
£475
7,920 kWh
£65
1,080 kWh
£115
£655
Indicative yearly electricity costs with your new heat pump
Heating
Hot water
Change in standing charges
Total
£406
1,781 kWh
£55
243 kWh
-£16*
£445
Monthly saving
£17
581 kWh
Annual saving
£209
6,976 kWh
For the purposes of this indicative illustration, we have assumed that your existing boiler + radiators system has a seasonal efficiency of around 85%. We have assumed that your new heat pump system will achieve a SCOP of 3.78 at a flow temperature of 50°C. This is based on the highest achievable SCOP from the product specification (1).This may vary when we carry out a full detailed design and specification. Approximately, this makes your new heat pump system 4.4 times more efficient than your existing system.
For your current gas supply, you have indicated a per kWh cost of 6p and a standing charge of 31.4p. For the purposes of the illustration, and based on the tariff you have selected, we have assumed that the average cost of electricity is 22.79p per kWh. Based on national averages, we have assumed that 12% of your total energy consumption is used for hot water.
* Standing charge adjustment. Most homes already pay a daily standing charge on their existing electricity supply. For this comparison, we have not counted that full charge again — only the change between your current rate and the rate on your selected heat pump tariff.
Your current electricity standing charge is 51.81p per day (around £189 per year). Your selected heat pump tariff has a standing charge of 47.4p per day.
Your selected tariff is 4.41p per day lower than your current electricity standing charge, so the figure marked * above reduces the heat pump costs by £16 per year.
Additional options available for your system
As part of the survey, we can discuss extras that you might need or want beyond the standard heat pump installation. You can play with these extras below to see how they might affect the overall cost.
Intatec Heat Pump Fitting Upgrades
Intatech Heat Pump Fittings are engineered to meet the rigorous demands of modern low-temperature heating systems, offering upgraded precision flow control and robust reliability for optimal heat pump performance.
Designed for compatibility with a wide range of heat sources, including air and ground source heat pumps, these fittings feature low-resistance pathways and high-integrity seals to minimize pressure drops and ensure efficient system operation. With options for pre-assembled kits, integrated isolation valves, and temperature/pressure measurement points, Intatech fittings streamline installation, commissioning, and ongoing maintenance. Manufactured to the highest standards, they support compliance with Part L and MCS guidelines, making them the ideal choice for both retrofit and new-build applications.
£475 per unit
Coloured Trunking
As standard, we install our systems with white trunking. If you would like to source this in a separate colour such as black, brown or grey- please select this option and let us know.
£65 per unit
The Natural Energy Company. 1 Cupar Road
Newport-On-Tay
Fife
DD6 8AF. Registered in Scotland
Company No. 354570.
£11,694
estimated price
no VAT applicable
